How To Setup Canon Pixma Ts3520 Printer?

Canon PIXMA TS3520 is an All-in-One wireless printer that can be easily set up. Being a wireless printer, the machine supports mobile printing as well, and hence you can print your photos or documents from your smartphone. There are a variety of options for mobile printing, such as the Canon PRINT app, Apple AirPrint, Mopria Print Service, etc. In this article, we have given the simple steps for how to setup canon pixma ts3520 printer.

Things you can see in your printer box:

  • Canon PIXMA TS3520
  • 4" x 6" Photo paper sample pack
  • Manual guide and other documentation
  • Starter Ink Cartridges
  • Power Cord

Steps to set up Canon PIXMA TS3520:

How To Setup Canon Pixma Ts3520 Printer

Unpack and turn on the printer:

  • The first step in setting up the Canon PIXMA TS3520 printer is to unpack the product box.
  • Take out all the box contents and place your printer on a table.
  • Now, look around the printer and remove all the protective tapes.
  • Also, remove the protective tapes from the inside of the printer.
  • Next, take the power cord provided along with the printer. Connect the power cord to the power port on the printer and an electrical wall outlet.
  • Press the power button on the printer and you will see the printer turn on.

Install the FINE Cartridges:

  • Move to the front of the printer and open the front door. Inside you will see two slots for the FINE Cartridges.
  • Now, unpack the Color cartridge and remove the protective tape.
  • Insert the cartridge into the left slot and push it in.
  • Similarly, unpack the Black cartridge, remove the protective tape, and install it in the right slot.
  • After installing the cartridges, close the front door.

Load the paper:

  • The Canon PIXMA TS3520 printer has a rear feed slot to place the paper. So, lift the paper support.
  • Move the paper width guide to the left edge.
  • Take few sheets of paper and load them into the paper feeder.
  • Adjust the paper width guide to the edge of the loaded paper.
  • Extend the output tray and paper stopper at the front.

Now, you’ve completed the initial steps for the Canon PIXMA TS3520 printer setup. Next, install the printer software on your computer and complete the setup. Meanwhile, connect your printer to your wireless network.

Software installation and wireless connection:

Requirements for the setup:

  • Keep your printer turned on.
  • See if your wireless router is turned on.
  • Download the printer driver from the official Canon support page.
  • Connect your computer to your wireless router.

Now proceed with the below steps.

  • On your printer, press the Wireless Connect button until you see the direct icon blink on the printer screen.
  • Also, you should see the Wireless and the horizontal bars flashing.
  • Now start the printer driver installation on your computer.
  • Click on Start Setup and carry out the instructions on the installation wizard to complete the Canon PIXMA TS3520 printer setup.

Contact us if you need remote assistance on how to setup canon pixma ts3520 printer.

Complete Tech Assistance