How To Setup Canon Pixma Ip8720 Printer

The Canon Ip8720 Printer Setup is the process of connecting the printer to an active wireless network. There are a few methods to connect the printer to a wireless network. Let’s see how to Setup Canon Pixma Ip8720 Printer.

Step 1: Open the product box

  • Remove the outer packing materials surrounding the product box and open it.
  • Inside the product box, you can find the following components: power cord, setup CD, ink cartridges, user guide, and other important documents related to the printer.
  • Now, take the printer components one by one out of the box.
  • After removing all the components, take the Canon printer out of the box.
  • Place the printer on a clean surface.
How To Setup Canon Pixma Ip8720 Printer

Step 2: Unpack and turn on the printer

  • Remove the packing materials and tapes from inside and outside the printer.
  • Get the printer’s power cord.
  • Connect the printer to a power outlet using its cord.
  • Now, locate and press the Power button on the printer control panel.
  • Wait for the printer to become stable and idle. Once it becomes idle, go to the next step given below.

Step 3: Install the ink cartridges

  • Open the ink cartridge access door.
  • Get the printer’s ink cartridges and unpack them.
  • After unpacking all the cartridges, install them one-by-one into their slots.
  • Make sure that the ink cartridges on your Canon printer are installed correctly.
  • Lower the cartridge cover.

Step 4: Load paper

  • Raise the input tray of your Canon printer.
  • Get and align a stack of A4 or U.S. paper.
  • Adjust the paper width guides based on the paper type you’re loading.
  • Place the paper in the tray and move the width guides towards the paper.
  • Pull out the output bin tray of your printer and follow the on-screen instructions to set the paper type.

Step 5: Install the printer software

  • Use the setup CD or the downloaded printer driver file to begin the Canon PIXMA iP8720 printer installation on your computer.
  • Choose the connection type, printer, and software correctly when prompted during the driver installation.
  • After installing the driver, print a test page to check whether the Canon printer setup is done correctly.
  • If the printer performs the print operation successfully, then it means the setup is done correctly.
  • Otherwise, re-perform the setup. Now we have learned how to Setup Canon Pixma Ip8720 Printer.

Click Call to contact our technical experts if you need remote assistance in setting up the Canon PIXMA iP8720 printer.

Complete Tech Assistance