How to connect Canon imageCLASS D570 printer to wifi?

How to connect Canon imageCLASS D570 printer to wifi?

In this section we will explain how to connect canon imageclass d570 printer to wifi. Follow the below methods to do the same.

Manual Wi-Fi Settings:

  • Make sure that the given power cord is connected to the printer and press the Power button to turn ON the Canon imageCLASS D570 printer.
  • On the control panel, select Network Settings and then press OK.
  • If prompted, enter the default PIN (222) using the numeric keys on the printer.
  • Under the Wireless LAN Settings menu, select SSID Settings.
  • Enter your router's SSID name, select Apply, and then press OK.
  • On the Security Settings screen, select WEP and then press OK.
  • Select Open System and press OK on the 802.11 Authentication screen.
  • If the printer shows an error message, it will automatically change the settings to a Shared key connection.
  • Select Edit WEP Key and press OK.
  • Next, select WEP Key 1 and press OK.
  • Now, enter the network key using the numeric keys on the printer and press OK.

Wireless Connection Using Wps Push Button Mode:

  • Make sure the Canon imageCLASS D570 printer is turned ON; if the printer is in sleep mode, then press the Power button to wake the printer.
  • Check if the router is configured and active.
  • On the printer control panel, use the navigation keys to select Network Settings and then press OK.
  • If the Enable the Wireless LAN message prompts, select Yes and then press OK.
  • In Wireless LAN Settings, select WPS Push Button Mode and then press OK.
  • If prompted, select Yes and then press OK.
  • On the router, press and hold the WPS button for five seconds. Depending on the router, you may have to press and hold the WPS button for more than five seconds.
  • Once the Canon imageCLASS D570 printer is connected to the router, the Wi-Fi indicator flashes.
  • If the setup is complete, the printer screen displays the Connected message.

Connect using WPA-PSK or WPA2-PSK:

  • Under the Security Settings menu, select WPA/WAP2-PSK and press OK.
  • On the WPA/WPA2 Encryption screen, select Auto and press OK.
  • If the printer is set to auto, it will automatically connect to the active router.
  • If AES-COMP is selected, enter the network key using numeric buttons on the printer and press OK.
  • If prompted, select Yes and then press OK.
  • Make sure the Wi-Fi indicator light flashes on the control panel.
  • Once the Wi-Fi connection is complete, the screen displays a Connected message, and the Wi-Fi light stops flashing.
  • Continue reading the steps to know how to connect canon imageclass d570 printer to wifi.

Connect the Printer to a Computer:

  • Once the printer is connected to the Wi-Fi, try to connect your computer to the same network.
  • Download the drivers from the official website; when the download is complete, run the setup file.
  • Follow the on-screen instructions; if prompted, click the Wi-Fi connection method radio button.
  • Follow the screen instructions to complete the Wi-Fi setup.
  • When the driver is installed, you can access your printer from the computer over your Wi-Fi network.

Now you have seen how to connect Canon imageCLASS D570 printer to Wi-Fi. Call us for more info and get instant solution.

Complete Tech Assistance