How to change ink in canon pixma printer?

The ink cartridges must be changed when the ink levels are low or empty. The steps on how to change ink in Canon PIXMA printer models are given on this web page.

how to change ink cartridge canon pixma mg2920?

Make sure that your Canon PIXMA MG2920 printer is switched On.
Retract the output tray and its extension. To know how to change ink in Canon Pixma printer, contact our experts.
Raise the top cover and then wait until the cartridge holder slides to the access position.
Take the empty cartridge out of the slot.
Get a new cartridge that is compatible with the Canon PIXMA MG2920 printer from an authorized store.
Remove the new cartridge from the packing and then discard the protective tape from it.
Place the cartridge at a slant angle into its appropriate holder.
The color cartridge must be placed in the left slot and the black cartridge in the right slot.
Push the cartridge in until it fixes into place.
Close the top cover and then modify the position of the printhead.
Once you have replaced the cartridge, make sure that you align the print head. Follow the above steps to know how to change ink cartridge Canon Pixma MG2920.

How to change ink cartridge Canon Pixma MG2520?

Here are the guidelines to know how to change ink cartridge Canon Pixma MG2520.
Power on the Canon Pixma MG2520 printer.
Wait until the Canon device initializes and then open its ink cartridge door.
Press the old Canon ink cartridges until you hear a click. Now, the cartridges can be removed.
Carefully remove the old cartridges and set them aside for recycling.
Unwrap the new Canon ink cartridge and remove the protective tape.
Insert the new cartridge in its slot and press it until it locks into place.
Repeat these steps to replace the other Canon cartridge if required.
Now, close the Canon Pixma MG2520’s cartridge door and print a document.
Tip: After a Canon cartridge is taken out of its packaging, keep the protective tape on to prevent the ink from drying up. Reach our tech experts to know how to change ink in Canon Pixma printer.

How To Change Ink Cartridge Canon Pixma Mg3520?

To know how to change ink cartridge Canon pixma MG3520, follow the quick steps as given below.

Turn on your Canon Pixma MG3520 printer to begin the replacement process.

Open the front lid of the printer and wait for the cartridge carrier to move to the right or left-hand side of you.

Now the cartridge cover will open.

Press on the top of the cartridge clip to release it.

Now, slowly remove the defective ink cartridge out of the printer and keep it aside.

Unpack the new ink cartridge.

Carefully place it in the correct slot in the carriage and close the printer lid.

Now, try a test print to check if the cartridges have been installed correctly. Know how to change ink in Canon Pixma printer easily by contacting our tech experts.

HOW TO CHANGE INK CARTRIDGE CANON PIXMA MX492?

If you want to know how to change ink cartridge Canon Pixma MX492, then follow the procedure stated here.

Check if the Canon Pixma MX492 printer is turned on.

Pull open the front cover of the Pixma printer followed by the Paper Output cover.

The cartridge holder will move to the replacement position.

Push the old cartridge downwards and remove it from its slot.

Unpack the new Canon ink cartridge and remove the protective tape present on it.

Install the new ink cartridge in a slightly slanting position.

Apply pressure on the cartridge until it clicks into place.

Close the output cover and take a test print. Reach our techies to know how to change ink in Canon pixma printer.

How to change ink cartridge canon pixma mx490?

Refer to the below steps to know how to change ink cartridge Canon Pixma MX490.

Confirm that you have switched On the Canon PIXMA MX490 printer.

Raise the front cover, and the paper output tray will automatically open.

The cartridge holder will move to the access area.

Push the empty cartridge down to release it. Now, take it out of the slot.

Remove your new cartridge from the package and then peel off the tape from it.

Install the fine cartridge at a slanting position into the cartridge holder.

Push the cartridge in until it fixes into place.

Make sure that you lower the paper output cover. This is the easy solution for the how to change ink in Canon Pixma printer query.

How to change ink cartridge Canon Pixma MG3620?

To Know how to change ink cartridge Canon Pixma MG3620, you can follow the basic guidelines mentioned below.

Ensure that the Canon Pixma MG3620 is powered on. Now, open the Canon device’s front cover and output tray.

Pull the paper output cover and open it. Wait until the head cover opens by itself.

Push the ink cartridge lever down and then remove the cartridge.

Remove all the packing materials from the new cartridge . Peel off the orange protective tape.

Slide the new Canon ink cartridge into the slot and make sure it’s rear side touches the back of the slot.

Now, push the cartridge lever up to lock the new cartridge into place.

Close the Canon device’s paper output lid. To know how to change ink in Canon Pixma printer, reach us.

How To Change Ink Cartridge Canon Pixma Mx922?

Read the below steps to know how to change ink cartridge Canon Pixma MX922.

Power on your Canon Pixma MX922 printer.

Raise the document and the ink cover.

Wait for the printhead holder to move into the replacement area.

Remove the defective cartridges from the Canon Pixma MG922 printer.

Purchase a new ink cartridge from the manufacturer’s site or a trusted retail store.

Carefully unbox the new ink cartridge without touching the nozzle/contacts.

Gently place the new cartridge into its slot and close the ink & document cover.

The Canon Pixma MG922 printer ink cartridge is now replaced successfully.

HOW TO CHANGE INK CARTRIDGE CANON PIXMA MG2950?

Follow these simple steps to get easy solution on how to change ink cartridge Canon Pixma MG2950 printer query.

The next step is to pull open the output tray and its extension.

Wait till the FINE cartridge holder slides to the replacement position.

Push down and uninstall the Canon ink cartridge from its slot.

Unwrap the new ink cartridge from its packet and discard the protective film.

The next step is to install the new cartridges in the respective slots.

Make sure you have installed the Canon cartridge properly and close the output cover.

Next, you have to adjust the position of the printhead. Align the printhead after replacing the ink cartridges. Contact our techies to know how to change ink in Canon pixma printer easily.