Canon Pixma Mx492 Wireless Setup

Before carrying out the Canon Pixma MX492 wireless setup process, make sure to complete the initial printer setup as per the instructions. Turn on your wireless router. On the control panel of your Canon printer, press and hold the Wi-Fi button until the wireless light starts to blink. After that, connect the Windows or Mac device to the same wireless network that the printer is connected. Once the wireless setup process is done, try a test print or scan operation.

Canon Pixma Mx492 Wireless Setup

CANON PIXMA MX492 SETUP FOR MAC

Follow the procedures given below to know more about Canon pixma MX492 setup for MAC process.

  • Make sure that you have done the initial Canon MX492 setup.
  • Check if the ink cartridges are full.
  • Now, switch on your wireless router to begin the Canon Pixma MX492 wireless setup process.
  • Enable the Wi-Fi network option on your printer.
  • From the Setup menu, select the Wireless LAN setup option.
  • Now the printer will look for the available wireless networks.
  • Press the Wi-Fi button of your wireless router when prompted.
  • Select Manual Setup on the Wireless LAN setup section.
  • Wait while the printer establishes a connection with your wireless network.
  • Now, connect the computer to the network that the printer is connected.
  • Download the Canon MX492 driver from the official site.
  • Install the downloaded printer driver on your computer as per the instructions appearing on the installer screen.
  • Select the setup & network type when prompted during the installation for the Canon Pixma MX492 setup for MAC process.
  • Perform the on-screen guidelines to finish the installation process.
  • Once the Canon Pixma MX492 wireless setup process is done, try a test scan or print operation.

Canon Pixma Mx492 Setup For Windows

To set up your Canon Pixma MX492 printer on the Windows system, follow the procedure as discussed below.

  • Turn on your Canon printer to begin the Canon Pixma MX492 Wireless setup process.
  • Check if the wireless router is turned On.
  • Make sure to connect the computer and the Canon MX492 printer to the same wireless network.
  • Install the Canon printer from the installation CD provided with the printer or download the Canon mx492 driver software from the printer’s official site.
  • Open the driver file to begin the installation process.
  • Tap the Next button on the PIXMA MS490 series page.
  • Choose the printer & wireless connection method when prompted.
  • A list of printers available on the network is displayed on the screen.
  • Select your printer from the list and click the Next button.
  • Perform the on-screen instructions. Finish the Canon Pixma MX492 wireless setup process and try a test print to check if the printer setup is done correctly.
Complete Tech Assistance