How To Do The Canon G2010 Printer Setup?

The Canon G2010 printer setup is done quickly with simple steps involved in it. If you buy the printer for the first time and are stuck with the setup procedure, you can check this page for more precise information.

The Canon PIXMA G2010 printer setup involves

  • Unpacking
  • Connecting the power cord
  • Filling the ink tanks
  • Installing the ink cartridges
  • Software installation
  • The printer setup hardly takes 10-15 minutes. At first, let us start with the unpacking process.

Unboxing the printer:

  • Take out the packaging materials from the box and remove all the protective materials from the inside and outside of your printer.
  • Kindly cross-check the packaging materials that came along with your Canon printer.
  • Now, let us proceed with the cartridge installation.
  • As your printer comes with two cartridges with the color labels, ensure that you insert them into the respective slots.

You must turn on your printer to start your preferred work. To turn on your printer, you need to connect the power cord that came with your Canon printer.

Canon G2010 Printer Setup
Canon Selphy Square QX10 setup

Turning on the Canon PIXMA G2010 printer:

  • At first, connect one end of the power cable to the back of your printer.
  • Now, connect the other end to an electrical outlet and ensure that the power cable is properly connected at both ends. Press the Power button. The printer turns on immediately.

If the problem remains unsolved, contact us for assistance in resolving it.

Filling the ink tanks:

  • As your printer comes with the supersized ink tank reservoirs, filling the ink tanks and checking the ink level are quite easy. Now, start filling the ink tanks.
  • Firstly, unwrap the ink bottle package and start opening the ink tank cover located on the right side of your Canon PIXMA G2010 printer.
  • Later, insert the ink bottles into the filling ports and close the ink tank cover. It's time to prepare the ink system, which nearly takes about 3-6 minutes.
  • To start the process, press the Black button. The Canon PIXMA G2010 printer is not yet connected to your computer.

After loading the paper, the hardware setup will be complete. Now, you can proceed with the software installation.

Software Installation:

  • You need not worry about downloading the full driver and software package from the manufacturer's website. Your ink tank printer comes with the setup CD-ROM.
  • By inserting the CD-ROM into your computer, you can establish the connection between your printer and the computer.
  • If you are not happy with this method, you can go with the manual driver download. The available connection method is a USB connection. As your printer supports only a Hi-Speed USB standard interface, you cannot connect your printer wirelessly.
  • After connecting the printer through the USB setup procedure, you can perform your work with all the features that your Canon PIXMA G2010 printer offers. If you have any queries regarding the Canon G2010 printer setup, then call us.

Related Queries

Complete Tech Assistance